Mobile Led Traffic Light Tempo (Set)
Waiting Time Display
TEMPO is the only work site traffic light to incorporate a display of waiting time in minutes and seconds. Visible from a distance of 40 meters, the waiting time display discourages drivers from passing through.
Autonomy
1 month with a 100 Ah battery
|
2 months with a 200 Ah battery
|
Easy to program
With the standard remote control the commands are clearly shown on the display coupled with its ergonomic infrared programming module.
Managing the progress of traffic on a site has never been so easy.
Tempo can adapt to be used on all your road work sites
The key word is flexibility.
In its standard version the Tempo traffic light also offers the ability to manage alternating traffic at three and four branch crossroads.
It supports the management of cross-cycles and changeover cycles on green.
Technical Characteristics
Electronics
- Programming and management interface using an infrared link with mobile synchronization panel.
- Module protected by a polycarbonate surface.
- Alpha-numeric display of 2 x 16 characters, of all cycle, programming and check information.
- Waiting time display.
Structure
- Wheel-trolley with ABS cover.
- Lifting handles.
- Telescopic mast: closed 1.55m, open 2.20m.
Options
Communication Options
- Radio link
- Cabled link
- Dry contact
Radar Options
- Movement Detection Radar
- Control radar
Control Options
- Radio remote control
- Call push-button
Optics Options
- Cross
- Arrows
- Colored Optics
Software Options
- Non-standard cycles
- Custom functions
Priority Detection
General
Detection of vehicle movement in a priority direction activates the lights cycle (i.e. site exit, fire rescue, police, ambulance etc.).
The lights must be synchronized using the radio link communication option or the cabled option.
Traffic Regulation
General
Management of traffic flow time, as a function of the traffic density in both traffic directions.
The lights adjust to match the traffic flow (i.e. large numbers of cars in one direction in the morning, and in the other direction in the evening).
The lights must be synchronized using the radio link communication option or the cabled option.
Remote Controlled Lights
General
Light operation mode management using a radio remote control (i.e. set lights on red for exit of fork lift trucks or for safe working between the two lights etc.).
The lights must be synchronized using the radio link communication option or the cabled option.